Applications:These tables are specifically designed for applications requiring high stability and repeatability in motion and/or in positioning (micron range)
Features:- The main parts of this table are made of grey cast iron (GG25) and the visible parts are ground
- Supplied with 2 pin holes and 4 threads (above and below). These machined features are for simple cross assembly of the tables
- Guide rails with needle bearing ensure linear displacement.
- A satellite roller screw provides a precise motion. Upon request, a micrometer screw with a preloaded bronze nut can be installed ("low cost" version).
- Limit switches ( home + end) are preinstalled and wired to a 15 pins SUB-D connector.
Displacement speed :We recommend a displacement speed between 0 and 5000 mm/min. (0 and 5000 rpm) maximum.
Load capacity (centred):Table in horizontal position: 0 to 20 kg max.
Table in vertical position: 0 to 10 kg max.
Maintenance:For normal use, one annual service will suffice (cleaning and lubrication). For a more intensive use, maintenance must be carried out every 6 months.